LEGRAND CHIEF PAC810, Руководство по установке

Страница: 5 / 8

Installation Instructions PAC810
5
Installation
NOTE:
The PAC810 video conferencing shelf can be mounted
before or after the display is mounted to the faceplate.
It may be mounted above or below the display.
Attach to Faceplate
1. Position video conferencing shelf (A) above or below the
faceplate making sure to line up the holes on the shelf with
the holes on the faceplate. (See Figure 1) or (See Figure 2)
2. Install two 1/4-20 x 3/4" button head cap screws (B) through
holes in shelf (A) and faceplate. (See Figure 1) or (See
Figure 2)
3. Thread two 1/4-20" lock nuts (C) onto screws (B) to secure
shelf (A) to faceplate. (See Figure 1) or (See Figure 2)
Figure 1
Figure 2
Camera Mounting
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all equipment and accessories mounted on the PAC810
does not exceed 10 lbs (4.54 kg).
NOTE:
Mounting options will vary depending on the type of
camera being mounted.
1. Install 1/4-20 x 3/8" Phillips pan machine screw (D) through
holes on shelf and into hole on bottom of camera. (See
Figure 3)
NOTE:
Camera can be secured to mount by threading a tie
through outside slots on camera mount and around the
camera.
NOTE:
It is also acceptable to mount the camera directly to the
shelf without any screws or ties.
Figure 3
1
(A)
3
(B) x 2
(C) x 2
2
faceplate
(top installation)
(bottom installation)
(B) x 2 2
faceplate
3
(C) x 2
1
(A)
camera (example)
(D)
1