Installation Instructions
PAC800HS/810HS
7
Installing Camera (not included)
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight
mounted on the
PAC800HS/810HS does not exceed 10 lbs
(4.5 kg).
WARNING:
Camera must be secured to PAC800HS/
810HS shelf using screws! Failure to securely mount camera
to shelf may result in serious personal injury or damage to
equipment!
1.
Place HuddleSHOT™ camera onto shelf. (See Figure 5)
2.
Use screws provided with camera and slots on shelf to
secure camera to shelf. (See Figure 5)
Figure 5
Adjustments
Height Adjustment
1.
Loosen two adjustment knobs on the back of the main
bracket (A). (See Figure 6)
2.
Raise or lower bracket to desired height. (See Figure 6)
3.
Tighten two adjustment knobs on the back of the bracket
until mount is secure. (See Figure 6)
Figure 6
Shelf Depth Adjustment
1.
Loosen two flathead cap screws on back of main bracket
(A). (See Figure 7)
2.
Adjust shelf (B) to desired mounting depth. (See Figure 7)
3.
Tighten two flat head cap screws on bracket (A) until mount
is secure. (See Figure 7)
Figure 7
2
HuddleSHOT™
Camera
(not included)
1
hardware (not included)
1
(PAC800HS shown)
1
2
3
(PAC800HS shown)
2
1
2
3
(B)
(A)
(PAC800HS shown)
2
