Installation Instructions
OLCM1U
11
Roll
1.
Adjust roll adjustment screw to change roll position.The roll
may be adjusted 3° in either direction. (See Figure 17)
Figure 17
Latch Lock/Security
IMPORTANT ! :
In order to prevent interface latch from
getting loose due to strong winds, the latch MUST be
locked either using a padlock or locking bolt (N) and 5/
16-18 hex nuts (Q). This is NOT optional!
Using Padlocks (Security)
1.
Add padlock (not included) to each interface bracket to lock
latch and to provide security for displays. (See Figure 18)
Figure 18
Using Bolts/Nuts
NOTE:
This will keep latch from opening but does not provide
additional security for the displays.
1.
Use 5/16-18 x 2" hex head carriage bolt (P), 5/16-18 hex nut
(R) and two 5/16" washers (S) to lock each interface bracket
latch in place. (See Figure 19)
Figure 19
roll adjustment screw
or
Padlock
(Optional)
(wind shield hidden for clarity)
(P)
(R)
(wind shield hidden for clarity)
(S) x 2
