LEGRAND Chief Koncis D1U, Руководство по установке, Страница: 4 / 8

D1U/D2U Installation Instructions
4
PARTS
A (1)
[Power base - D1U]
A (1)
[Power base - D2U]
or
B (1)
[Wall charger]
Assembly And Installation
1. Remove Koncis™ mount arm(s) from mount base.
2. Remove cover from top of mount base. (See Figure 1)
Figure 1
3. Install power base (A) to mount base by placing it over the
pin of the mount base. (See Figure 2)
4. Place removed arm onto power base by placing it over the
pin of the mount base. (See Figure 2)
Figure 2
5. Plug cable into power source. Use wall charger (B) as
desired.
6. Plug in any electrical devices as desired making sure not to
exceed the following power ratings:
• One USB type "A", one USB type "C": 5Vdc, 3.1A/
15W (shared) (See Figure 3)
Figure 3
2
Koncis™ base
mount cover
3
4
(A)
Koncis™ mount arm
(D1U shown)
Koncis™ base
USB Type "C"
USB Type "A"
6