Product Overview
Front Panel
3
F
RONT
P
ANEL
D
ESCRIPTION
1 Power LED
On:
Power is applied to the device.
Off:
No power is applied to the device.
2 Status LED
Blinking:
The device is working properly.
Off:
The device is not working properly.
3 HDCP LED
On:
HDCP protected content is being transmitted.
Blinking:
Non-HDCP protected content is being transmitted.
Off:
No content is being transmitted.
4 Link LED
On:
HDBT link is normal.
Off/Blinking:
No HDBT link or link error.
5 RS232 DIP
Switch
Pass-through (default):
For controlling the transmitter for input
selection.
MCU:
For MCU firmware update.
VS:
For VS firmware update.
Note:
Transmitter and receiver must be updated individually.
R
EAR
P
ANEL
D
ESCRIPTION
6 DC 12V
DC 12V power input; connect to the power adapter provided.
7 HDBT IN
Connect to the transmitter via a Cat 5e/6/6a cable.
8 RS232
For RS232 pass-through or firmware upgrade, and can be set through
DIP switch on front panel.
9 HDMI OUT
Connect to an HDMI display using an HDMI cable.
10 2x Audio Out
Unbalanced stereo audio output.
De-embed:
For audio de-embedding from the HDMI output.
Pass-through:
For audio pass-through from Audio In port on the
transmitter to this port.
11 4x USB-A
Connect to USB devices such as keyboard, mouse, USB camera, etc.
Note:
USB ports support USB 2.0 standards with a maximum of 1.4A
for the top two ports and 0.6A on the bottom two ports. USB cameras
are recommended to be connected into one of the top two 1.4A ports.
Receiver
Receiver
Rear Panel
(us)
HDMI® H USB
-
C®, 3.5mm, and USB
-
B to A over Cat Extender Wall Plate
Transmitter to Box Receiver
-
4K 60Hz
(us)
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
Содержание C2G31011
Страница 2: ......
