Rear Panel
Product Overview
Front Panel
2
F
RONT
P
ANEL
D
ESCRIPTION
1
Power LED
On:
Power is applied to the device.
Off:
No power is applied to the device.
2
HDMI LED
On:
HDMI input signal is active.
Off:
No HDMI signal input.
3
Link LED
On:
HDBT link is normal.
Off/Blinking:
No HDBT link or link error.
4
HDMI IN
Connect to an HDMI source using an HDMI cable.
5
USB Host
Connect USB host PC.
R
EAR
P
ANEL
D
ESCRIPTION
6
HDBT OUT
Connect to the HDBT receiver via a Cat 5e/6/6a/7 cable.
7
DC 12V
Connect to a DC 12V power adapter. With one-way PoH
function supported, the transmitter can be powered by the
receiver.
8
RS232
Connect to a RS232 enabled device for RS232 pass-
through or connect to a PC for upgrading firmware.
9
DIP Switch
Control the function of RS232 port.
Update:
RS232 port is used to update Valens firmware.
Pass-through:
RS232 port is used to command pass-
through via HDBT port. Users can use API command to
upgrade its MCU firmware in this mode.
Transmitter
Transmitter
(us)
HDMI H USB
-
B to A and RS232 over Cat Extender Single Gang Wall Plate
Transmitter to Box Receiver
-
4K 60Hz
Содержание C2G30030
Страница 2: ......
