Rear Panel
Product Overview
Front Panel
2
F
RONT
P
ANEL
D
ESCRIPTION
1
Power LED
On:
Power is applied to the device.
Off:
No power is applied to the device.
2
HDMI IN 1-2
On:
The corresponding HDMI input is selected.
Off:
The corresponding HDMI input is not selected.
3
Link LED
On:
HDBT link is normal.
Off/Blinking:
No HDBT link or link error.
4
INPUT Selection
Button
Press to switch selected input source.
5
HDMI IN 1-2
Connect to an HDMI source using an HDMI cable.
R
EAR
P
ANEL
D
ESCRIPTION
6
HDBT OUT
Connect to an HDBT receiver (such as C2G30015) via a
Cat 5e/6/6a/7 cable.
7
DC 12V
Connect to a DC 12V power adapter. The transmitter can
be powered by the receiver with PSE module.
8
RS232
Connect to a RS232 enabled device for RS232 pass-
through or connect to a PC for upgrading firmware.
9
DIP Switch
Control the function of RS232 port.
Update:
RS232 port is used to update Valens firmware.
Pass-through:
RS232 port is used to command pass-
through via HDBT port. Users can use API command to
upgrade its MCU firmware in this mode.
(us)
Dual HDMI H RS232 over Cat Extender Single Gang Wall Plate Transmitter
-
4K 60Hz
(us)
Transmitter
Transmitter
Содержание C2G30022
Страница 2: ......
