Mounting instructions -
range
2. CHECKING THE WALL IS EVEN
Check that the wall is perfectly flat around
the flush-mounting boxes with a ruler or spirit level.
3. PRECAUTIONS WHEN FITTING THE MECHANISM
4. PRECAUTIONS WHEN FITTING THE FINISHING PLATE
UNCLIPPING THE PLATE
Tighten the screws
(provided) for fixing
the mechanism onto the flush-mounting
box.
Before installing the mechanism,
remove
the wiring accessory fixing screws from
the flush-mounting boxes.
Wire up and then reposition
your mechanism
in the flush-mounting box.
Use the notch
on the side
of the finishing plate while gently
levering it to
unclip it
.
The finishing plate should be fitted at the end of installation.
Only use screws provided
with the
ART
D'ARNOULD
mechanisms
for their installation.
1. CHOOSING THE FLUSH-MOUNTING BOX
European installation:
minimum depth 50 mm
British Standard installation:
minimum depth 35 mm
L
L
≥
50 mm
L
≥
35 mm
L
NB:
Optimum compatibility of
ART
D'ARNOULD
products with
LEGRAND brand boxes.
To avoid damaging decorative parts associated with the mechanisms,
make sure that before you clip the plate in place,
it is correctly centred
on the mechanism
.
To ensure the best visual appearance, turn the plate so that the the
screwdriver entry point cannot be seen (eg: turned to the bottom
position).
ART
D'ARNOULD
finishes are fragile
(supplied with individual heat-sealed bag).
Take the plate out of its individual box, but do not use a sharp knife or scissors.
Remove the toggle protection
after fitting the finishing plate
.
Safety instructions
This product should be installed in compliance with installation rules,
preferably by a qualified electrician. Incorrect installation and/or incorrect
use can lead to risk of electric shock or fire.
Before carrying out the installation, read the instructions and take account
of the product’s specific mounting location.
Do not open up, dismantle, alter or modify the device except where
specifically required to do so by the instructions. All Legrand products
must be opened and repaired exclusively by personnel trained and
approved by Legrand. Any unauthorised opening or repair completely
cancels all liabilities and the rights to replacement and guarantees.
Use only Legrand brand accessories.
Toggle
protection
Remove
the toggle
protection
(without tool)
