Doc No. FM5541 issue A Page 3
2.
IMPORTANT SAFETY INSTRUCTIONS
Read and understand these instructions before use. Keep these instructions for future reference.
Do not disassemble this product or attempt to repair it yourself.
No user serviceable parts inside. Refer all servicing to qualified service personnel.
This product should only be powered by 1 x 3.6V ½ AA size 1.2Ah Lithium Thionyl Chloride battery.
Under no circumstances should this product be powered from another power source.
Insert the battery in accordance with the polarity symbol inside the battery holder.
Only use manufacturer approved ½ AA size 3.6V battery as identified in this manual.
Do not expose to direct sunlight.
Do not submerge in water and do not use in damp or humid conditions.
Do not expose to dripping or splashing water. As with any electronic equipment take care not to spill
liquids into any part of the system. Liquids can cause a failure and/or a fire hazard.
Do not drop or expose to high vibration or shock.
Clean with a hard-surface disinfectant wipe or a damp cloth and a non-abrasive cleaning product.
Polish with a dry duster. DO NOT use a wet cloth.
Avoid using harsh, abrasive, or corrosive cleaning agents or detergents (e.g. scouring powders, bleaches,
polishes, etc.) when cleaning this product.
At the end of its life this product should be disposed of and recycled in accordance with the
environmental regulations. See the Regulatory Information in section 3 below.
CONTENTS