6
Description
Operation
The general shutter controller Using its Up - Stop - Down keys it can simultaneously control a set of products (actors) that
have been associated with it during the learn phase
(1)
. It is then the Leader of the scenario
(2)
.
The general shutter controller is always the central control point (Leader) of a scenario.
It has two auxiliary inputs, E
1
and E
2
, which can be connected to a light sensitive switch, a wind/sun safety control,
time switch, etc:
- The appearance of voltage on E
1
starts the scenario which is recorded on the Up control key.
- The appearance of voltage on E
2
starts the scenario which is recorded on the Down control key.
(1) Learn phase: Operation to associate products so that they can be controlled simultaneously from a central point.
This association is carried out by applying the learn scenario procedure on page 7.
(2) Scenario: Corresponds to the set of products (actors) that are associated with a command key.
Caution :
The Stop control key cannot be accessed from auxiliary inputs E
1
and E
2
.
Communication media
PLC => Mains-borne signalling
IR => Infrared
LEARN indicator lamp
ID number
Infrared cell
LEARN key
Command
keys