LEGRAND 674 56, Руководство по установке

Страница: 101 / 164

101
Access to the Main Menu
After performing the operations described in the “Switching on for the first time” chapter, you can
access the programming menus to perform a wide series of customisations which can exploit the
features of the Temperature control unit to the full and satisfy user requirements.
There are two programming levels:
level 1 • (user), gives access to all the menus apart from the Maintenance menu , where there
are functions which are reserved to the installer or an expert user.
Access to the user level can be protected by the User code (default disabled).
level 2 • (installer), gives access to all the menus.
Access to the installer level requires the Maintenance code (default 12345 ).
6 - Main menu
To quit the Main Menu wait for 2 minutes without pressing any key or press the
key.
When the access codes are modified, they should be given in the boxes below.
User code
0 0 0 0 0
NEW USER CODE
Mainten. code
1 2 3 4 5
NEW MAINTENANCE CODE
MAIN MENU
Mode
Zone state
Current profiles
Programming
Setup
Maintenance