LEGRAND 5739 94, Руководство по установке

Страница: 27 / 36

27
3 - Remote control description
ON OFF
1
2
3
4
3.4 - Remote control configuration
The factory configuration can be modified by repositioning the configuration switches as shown
in the following table.
To access the switches, remove the remote control batteries door.
To enable any changes made in the configuration, reset the
remote control by removing the batteries.
Switch 1
Switch 1= ON When a key is pressed the related LED will turn on
Switch 1= OFF When a key is pressed the related LED will not turn on
Switch 2
Switch 2= ON When a key is pressed a “beep” will sound
Switch 2= OFF When a key is pressed no “beep” will sound
Switch 3
Switch 3= ON Enters into configuration mode
Switch 3= OFF
Upon configuration completion, move the switch back to
the OFF position (normal operation mode)
Switch 4
Switch 4= ON future application
Switch 4= OFF future application