5
OFF
ON
B
A
D
C
4.1.2
Check the correct pairing
4.2.1
Pair a wireless motion sensor with a connected micromodule
Phase
A
: Press the ON button on the wireless switch you wish to pair, while tapping it three
times onto the light switch you wish to control.
Phase
B
: The indicator lights on the two products will flash blue rapidly.
Phase
C
: The indicator lights on the two products will briefly turn blue and stop flashing.
Phase
D
: The light on the wired product will turn green again and the light on the wireless
motion sensor will switch off.
Press the ON and OFF buttons of the wireless motion
sensor to check if the light turns on and off correctly.
If it doesn’t, come back to step
4.1.1
.
