3
1
Install the connected lighting micromodule
The Arteor with Netatmo connected lighting micromodule can be easily installed in a
ceiling light or in wall lights.
OFF
1
Switch OFF the power at the main circuit breaker
2
Wire the connected lighting micromodule
Option:
remote control wiring
using a non-illuminated
mechanical pushbutton.
x 5 Max.
N (neutral) = blue
L (live) = any except blue and green/yellow
(earth) = green/yellow
Frequency bands: 2.4 - 2.4835 GHz
Power level: < 100 mW
Max. 30 m
Make sure that the power is off
before continuing with the installation.