LEGRAND 48DCWC-04-2X100-D0NB, Руководство пользователя

Страница: 174 / 211

PRO1 Sentry Switched DC PDU
174 of 211
set phase
Sets phase configuration values.
Command Syntax
set phase email [disabled | enabled] <name | id | ALL>
set phase pf [alarmlo | warnlo] <name | id | ALL> <value>
set phase snmpt [disabled | enabled] <name | id | ALL>
set phase volts [alarmhi | alarmlo | warnhi | warnlo] <name | id | ALL> <value>
set phase volts hyst <value>
Parameters
The set phase command uses the following parameters:
email Sets email notifications for phase events.
hyst Sets hysteresis between event state and recovery.
pf Sets power factor. min 0.00, max 1.00, hyst 0.0-0.20 (default 0.02).
snmpt Sets SNMP trap notifications for phase events.
volts
Sets voltage. min and max vary by product
*
,
hyst 0.0-20 (default 0.02). * For the
min-max range, issue set cord nomvolts all command (press ESC to quit command).
Sub-Parameters
The set phase command uses the following sub-parameters:
alarmhi Sets high alarm value.
alarmlo Sets low alarm value.
warnhi Sets high warning value.
warnlo Sets low warning value.
Command Access
Admin level only
set port
Sets serial port configuration values.
Command Syntax
set port [baud | speed] [1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200]
<name | id >
set port dsrcheck [disabled | enabled] <name | id >
set port timeout <name | id > <timeout>