LEGRAND 4 306 31, Руководство пользователя

Страница: 49 / 86

49
Parameter Function
Event Type It includes local alarm/network alarm.
- Local alarm: Device detects alarm from input port.
- Network: Device detects alarm from network.
Alarm in Select corresponding alarm channel.
Enable Check to enable the alarm function.
Type There are two options: normal open and normal close.
NO becomes activated in low voltage, NC becomes activated in high voltage..
Period - Alarm record function becomes activated in the specified periods.
- There are six periods in one day. Enable corresponding period.
- Select date or whole week.
- Click OK button, system goes back to alarm setup interface, please click save button
to exit.
Anti-dither System only memoryze one alarm during the period set here (0 to 600 s)
Normal Out Select alarm output port so that system can activate corresponding alarm device
when alarm occurs.
Alarm Latch System delay the alarm output for specified time after alarm end (from 10 seconds to
300 seconds).
Record Chan-
nel System auto activates current channel to record once alarm occurs (working with
alarm activation function). Note current device shall be in auto record mode (Chapter
8.2.3 Schedule).
Record Latch System can delay the record for specified time after alarm ended.
The value ranges from 10s to 300s.
Email Check to enable email function. System can send email when alarm occurs and ends.
Tour This function is not available in current device.
PTZ activation The system can go to a preset when alarme occurs (only for IP speed dome).
Capture Input capture channel number so that system can backusnapshot file to the SD card
or send to the specified email box when alarm occurs.
Copy It is a shortcut menu button. You can copy current channel setup to one or more (all)
channels.
Save You can click save button after you complete setup for one channel, or you can
complete the whole setups and then click save button.
Refresh Click this button to get device latest configuration information.