13
(1) Mount the camera on the mounting bracket by using the hole on the top or bottom of the camera or by using
the encloses 8 mm mounting block, furnished by 2 screws.
(2) Connect the video output to the monitor or other video device via a 75 Ohms type coaxial cable.
(3) Connect the power source, using the DC Jack (+12V DC in the jack center).
(4) Wait a while for the camera to power on and the zoom lens will resume to the previous power on position
automatically.
(5) Once the picture appears on the monitor, press the zoom tele, zoom wide, focus near, focus far
and setup menu key to obtain the best picture quality.
7.1 Keyboard operation
7.1.1 Normal display mode
Keyboard
Camera function
Open
Brightness (+)
Close
Brightness (-)
Near
Focus Near
Far
Focus Far
Twist Joystick Clockwise (Zoom In)
Zoom Tele
Twist Joystick Counter Clockwise (Zoom Out)
Zoom Wide
Move Joystick Left
X
Move Joystick Right
X
Move Joystick Up
X
Move Joystick Down
X
Keyboard
Camera function
Enter 95 ; Press Preset 5 s
Access to OSD Main Menu
Enter a number (1-32 ; 35-82) ; Press Preset
Call the Preset Point
Enter a number (1-32 ; 35-82) ; Press Preset 2 s
Set the Preset Point
7.1.2 Main menu mode
Keyboard
Camera function
Open
Enter Sub Menu
Close
Exit Sub Menu
Near
Cursor Up
Far
Cursor Down
Twist Joystick Clockwise (Zoom In)
x
Twist Joystick Counter Clockwise (Zoom Out)
x
Move Joystick Left
Decrease (-)
Move Joystick Right
Increase (+)
Move Joystick Up
Cursor Up
Move Joystick Down
Cursor Down
7. OPERATION
