3.10 OSD Display
P/T/Z Information
Displays the amount of pan from zero degree
horizontal and c
magnification.
Camera ID
Displays the selected
Action Title
Identfies Actions
"SET PRESET xxx"
"PRESET xxx"
"PATTERN x"
"SWG
/PRESET xxx"
"UNDEFINED"
Preset Label
Displays preset labels when the camera arrives at presets.
Alarm Information
Displays activated alarms.
Outputs. If an Input
Input point is
OFF
Example: The p
38
Displays the amount of pan from zero degree vertical, the amount of tilt from zero degree
horizontal and current compass direction. Also identifies the amount of the zoom
magnification.
Displays the selected Camera ID (Address).
Identfies Actions
"SET PRESET xxx"
When Preset xxx is memorized.
When the camera reaches Preset xxx.
When Pattern x is in action.
/PRESET xxx"
When Swing x is in action. Displays both of Swing number and
Preset number.
When a undefined function is called to
Displays preset labels when the camera arrives at presets.
Displays activated alarms. This information shows current state of Alarm I
nput point is
ON
state, it will show a number corresponding to each
OFF
state,
'-'
will be displayed.
The point 2 & 3 of inputs are
ON
and Output is
ON
, OSD will show as below
vertical, the amount of tilt from zero degree
compass direction. Also identifies the amount of the zoom
When the camera reaches Preset xxx.
When Swing x is in action. Displays both of Swing number and
is called to run
This information shows current state of Alarm Inputs and Relay
it will show a number corresponding to each point. If an
OSD will show as below.