LEGRAND 1U, Руководство пользователя

Страница: 425 / 543

Janu
ary 201
9
Legrand PDU User Guide 425
Uploading or Downloading Raw Configuration Data
You can download the raw configuration data of a specific Legrand PDU for review, backup or modification.
After modifying or creating any raw configuration data, you can upload it to a specific Legrand PDU for
changing its configuration. The uploaded raw configuration file can contain only partial configuration keys
that you want to modify. Other settings that are not contained in the uploaded file will remain unchanged.
Syntax of the raw configuration data is completely the same as the syntax in the config.txt file. See
config.txt
(on page 437).
Warning: Some configuration keys in the downloaded raw configuration are commented out, and those must
NOT be part of the configuration that will be uploaded to any Legrand PDU. See Keys that Cannot Be Uploaded
(on page 426).

To download raw configuration data:
1. Type one of the following SCP commands and press Enter.
Scenario 1: Use the default SCP port and default filename
 SSH/SCP port is the default (22), and the accessed Legrand PDU is a standalone
device.
 The raw configuration file's default filename "raw_config.txt" is wanted. Then add a
dot (.) in the end of the SCP command as shown below.
scp <user name>@<device ip>:/raw_config.txt .
Scenario 2: Specify a different SCP port but use the default filename
 SSH/SCP port is NOT the default (22), or the accessed Legrand PDU is a
Port-Forwarding slave device.
 The raw configuration file's default filename "raw_config.txt" is wanted. Then add a
dot in the end of the SCP command as shown below.
scp -P <port> <user name>@<device ip>:/raw_config.txt .
Scenario 3: Specify a new filename but use the default SCP port
 SSH/SCP port is the default (22), and the accessed Legrand PDU is a standalone
device.
 Renaming the raw configuration file is wanted.
scp <user name>@<device ip>:/raw_config.txt <filename>
Scenario 4: Specify a different SCP port and a new filename
 SSH/SCP port is NOT the default (22), or the accessed Legrand PDU is a
Port-Forwarding slave device.

Renaming the raw configuration file is wanted.
scp -P <port> <user name>@<device ip>:/raw_config.txt <filename>
 <user name> is the "admin" or any user profile with Administrator Privileges.

<device ip>
is the IP address or hostname of the Legrand PDU whose data you want to download.
 <port> is the current SSH/SCP port number, or the port number of a specific slave device in the
Port-Forwarding chain.

<filename>
is the new filename of the downloaded file.
2. Type the password when prompted.