LEGRAND 1U, Руководство пользователя

Страница: 426 / 543

Janu
ary 201
9
426 Legrand PDU User Guide
3. The system downloads the specified data from the Legrand PDU onto your computer.
 If you do NOT specify a new filename in the command, such as Scenarios 1 or 2, the downloaded
file's default name is "raw_config.txt."
 If you specify a new filename in the command, such as Scenarios 3 or 4, the downloaded file is
renamed accordingly.

To upload raw configuration data:
1. Type one of the following SCP commands and press Enter.
Scenario 1: Only one Legrand PDU to configure, with the default SCP port
 SSH/SCP port is the default (22), and the accessed Legrand PDU is a standalone
device.
 There is only one device to configure so a CSV file for device-specific settings is
NOT needed.
scp <config file> <user name>@<device ip>:/raw_config_update
Scenario 2: Only one Legrand PDU to configure, with a non-default SCP port
 SSH/SCP port is NOT the default (22), or the accessed Legrand PDU is a
Port-Forwarding slave device.
 There is only one device to configure so a CSV file for device-specific settings is
NOT needed.
scp -P <port> <config file> <user name>@<device ip>:/raw_config_update
Scenario 3: Multiple Legrand PDU to configure, with the default SCP port

SSH/SCP port is the default (22), and the accessed Legrand PDU is a standalone
device.
 There are multiple devices to configure so a CSV file for device-specific settings is
needed during the upload.
scp <dev_list file> <config file> <user name>@<device
ip>:/raw_config_update /match=<col>
Scenario 4: Multiple Legrand PDU to configure, with a non-default SCP port

SSH/SCP port is NOT the default (22), or the accessed Legrand PDU is a
Port-Forwarding slave device.
 There are multiple devices to configure so a CSV file for device-specific settings is
needed during the upload.
scp -P <port> <dev_list file> <config file> <user name>@<device
ip>:/raw_config_update /match=<dev_col>

<config file>
is the filename of the custom raw configuration that you want to upload.
 <user name> is the "admin" or any user profile with Administrator Privileges.
 <device ip> is the IP address or hostname of the Legrand PDU where you want to upload the
specified file.
 <port> is the current SSH/SCP port number, or the port number of a specific slave device in the
Port-Forwarding chain.

<dev_list file>
is the name of the CSV file for configuring multiple Legrand PDU with
device-specific settings. For this file's format, see
devices.csv
(on page 439).