ULTRA
™
furniture
design
owners manual 99301592
13
c. Locate (2) holes in base frame at one corner of head end of base.
Place the headboard bracket weldment underneath base frame
and against the head end of the base, positioning the bracket
weldment so the carriage bolt appears through the innermost
hole in the base frame (
FIGURE 9
). Place hex nut on 1/2” long
carriage bolt to attach bracket weldment to base frame. Loosely
tighten to allow adjustment for headboard hole alignment. Place
second 1/2” long carriage bolt in remaining hole and secure using
hex nut. Loosely tighten to allow adjustment for headboard hole
alignment.
INSTALLATION
HEADBOARD
BRACKET
WELDMENT
HEAD END
OF BASE
FRAME
HOLES
1/2 INCH LONG
CARRIAGE BOLT
AND NUT
FIGURE 9
