Premier Series
™
Owners Manual 99301588-b
23
REMOTE CONTROL PROGRAMMING
(1 remote control - 1 base)
Program One Remote to Operate One Base
- perform the
following numbered procedure.
STEP 3
Then, within 15 seconds, simultaneously press
the
Set 1
and
Set II buttons
on the remote
control (
FIGURE 22
). The underbed light will
“chirp” twice to indicate remote control is
paired.
One remote control is now programmed to
operate one base.
STEP 1
Position base on its side.
CAUTION: AT
LEAST TWO PEOPLE ARE RECOMMENDED
FOR HANDLING AND MOVING ADJUSTABLE
BASE.
Locate the control box, attached to the
underside of the base (
FIGURE 21
).
STEP 2
Using a pointed object, press and hold the
learn button
for two seconds
(
FIGURE 21
). The
underbed light will “chirp” once to indicate
base is in pairing mode.
SET I
BUTTON
SET II
BUTTON
FIGURE 22
LEARN
BUTTON
CONTROL
BOX
FIGURE 21
TO UNPAIR THE REMOTE(S), USING A POINTED
OBJECT, PRESS AND HOLD THE LEARN BUTTON
ON THE CONTROL BOX FOR 10 SECONDS.
THE UNDERBED LIGHT WILL “CHIRP” 4 TIMES
WHEN PROCESS IS COMPLETE.
NOTE
Содержание PREMIER FOUNDATION DESIGN
Страница 2: ......
