IMPORTANT SAFETY INFORMATION
This device allows remote configuration and operation of powered furniture. Care should be taken that all furniture is unoccupied and
free of obstructions before remotely operating or configuring the furniture.
Use only LP Drive components with this product. The use of incompatible products may damage this product or other connected
products or components, and may result in electrical malfunctions.
1. Read all instructions before using this product.
2.
DANGER
– To reduce the risk of electric shock, always unplug this device from its power source before cleaning.
3.
WARNING
– To reduce the risk of burns, fire, electric shock, or injury to persons, unplug from outlet before putting on or taking
off parts.
4. Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or
dropped into water. Return the furnishing to a service center for examination and repair.
5. Do not install near any heated services.
6. Contact a qualified service technician when: product has been damaged in any way such as power supply cord, liquids have
penetrated interior of enclosures, or product does not work properly.
7. Do not use outdoors.
8. Do not power on or operate the product with any part of the enclosure removed.
9. Connect all cables to the bridge before connecting the power supply to the outlet.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
OVERVIEW
The LP Connect Wi-Fi Bridge enables Leggett & Platt’s LP Connect-compatible devices to be connected to a 2.4 GHz wireless network
and controlled through software, mobile apps, and automation systems. Because LP Connect uses a bus topology that also carries
power, devices can be connected in series, with one power supply and Wi-Fi module servicing several LP Connect devices. An example
would be a row of theater seats, with one Wi-Fi module at the end, and each chair’s controller connected to the adjacent chair.
CONNECTIONS
The LP Connect Wi-Fi Bridge enables Leggett & Platt’s LP Connect-compatible devices
to be connected to a 2.4 GHz wireless network and controlled through software, mobile
apps, and automation systems. Because LP Connect uses a bus topology that also
carries power, devices can be connected in series, with one power supply and Wi-Fi
module servicing several LP Connect devices. An example would be a row of theater
seats, with one Wi-Fi module at the end, and each chair’s controller connected to the
adjacent chair.
For setup, connect the Wi-Fi Bridge directly to a power supply.
Figure 1. LP Connect Wi-Fi bridge components
Diagnostic LEDs
8-pin DIN connectors Reset button
