Leggett & Platt Bas-X 2.0, Руководство пользователя

Страница: 7 / 16

Bas-X™ 2.0 Owners Manual 290-0006
7
INSTALLATION
STEP 4
With base still in shipping carton, rotate the entire bottom carton on
its edge and then gently rotate over so base is resting on its legs.
STEP 3
Install (4) legs into the base frame. Simply screw each
leg into a tapped hole at each corner of the base frame
(
FIGURE 1 ).
STEP 2
Uncoil the main power cord and remote control and
extend them out head end of base, then remove the
hardware box from shipping container. Cut the zip-tie
and remove the mattress retainer.
7” LEGS –
SCREW INTO
TAPPED HOLE
AT EACH
CORNER
FIGURE 1
POWER CORDS MUST NOT INTERFERE
WITH ANY ADJUSTABLE BASE
MECHANISMS.
DO NOT WEAVE CORDS THROUGH BASE
STRUCTURE.
WARNING WARNING
READ ALL INSTRUCTIONS BEFORE USING
STEP 5
Remove the shipping carton and plastic packaging from the adjustable
base frame. Remove protective fi lm from Micro-Hook™ strips, if
applicable.
AT LEAST TWO PEOPLE ARE RECOMMENDED
FOR HANDLING AND MOVING ADJUSTABLE
BASE.
WARNING WARNING
READ ALL INSTRUCTIONS BEFORE USING