Legends - Renegade GPS Speedometer Cluster -
Gauge Operation Instructions
Follow these steps below for all menu items
1. Press and hold button down while turning on gauge power to enter the calibration menu.
2. A quick button press will toggle LCD screen through all the available menu settings and display.
3. Press and hold to select the menu item (2-3 seconds).
4. Press and hold button to change setting.
Use the “TACH CAL.” menu to calibrate the TACHOMETER Pulses Per Rev (PPR) [available on some models]:
Repeatedly press the button to toggle through the following PPR options:
(Press and hold to set a selected PPR)
Use the “FUEL CAL.” menu to calibrate the the ohm range for the FUEL LEVEL:
Repeatedly press the button to toggle through the following OHM ranges:
(Press and hold to set a selected Ohm range)
How to calibrate the FUEL LEVEL gauge to custom Ohm Range:
After toggling through the Ohm ranges there will be an “EMPTY”
option and a “Full” option.
EMPTY option:
While your fuel tank is empty press and hold to set.
FULL option:
While your fuel tank is full press and hold to set.
(Fuel Level Calibration, Tachometer Calibration, Set Odometer, and About Screen)
- 7 -
FULL
TOGGLE TO CHANGE.
HOLD TO SELECT.
EMPTY
TOGGLE TO CHANGE.
HOLD TO SELECT.
Empty
Full
Vehicle
Application
0 ohms
30 ohms
Most pre-'65 GM
0 ohms
90 ohms
Most GM
‘65-present
16 ohms
158 ohms
Most Fords
'87-present
73 ohms
8-12 ohms
Most Fords before
'87 and most
Chrysler
240 ohms
33 ohms
Use with 3262
sender
10 ohms
70 ohms
Ford Bi- Metallic
Gauges (pre 1987
F-Series Trucks)
15 ohms
160 ohms
Ford Magnetic
Gauges (1987 and
later F-Series Trucks)
CHART 1:
Common Factory Ohm Ranges
Use the “Set Miles” menu to set the Odometer miles:
Repeatedly press the button to toggle through the digits:
(Press and hold to cycle the numbers 0-9)
T
o save: do not press the button for 5 seconds.
Use the “About” screen to view manufacturing date and other diagnostic information:
000000
MI
1. HOLD TO SCROLL.
2. QUICK TO TOGGLE