Legend Gas Fires recommend that this appliance is serviced at regular 12 monthly intervals. The
chimney or flue should also be checked regularly to ensure that all products of combustion are entering
the flue and there is no excessive build up of soot.
It is the users responsibility to ensure that the appliance
is kept in a clean serviceable condition.
1. Ceramic Components and Fuel Bed - Debris from any
source should be removed with a soft brush. Please ensure
that any debris including soot deposits are removed from the
appliance and not left on the fuel bed. It is recommended that
the user should, on a regular quarterly basis, carefully
remove all ceramic components and thoroughly clean the
stainless steel burner strip and the pilot assembly. Any build
up of debris in this area could affect the operation of the
appliance.
NOTE: It is common to find surface cracks in the ceramic components. This is due to the expansion and
contraction of the ceramic fibres caused by the intense heat that the burner generates. The cracks will not
affect the safe operation of this appliance. However great care must be taken when handling the ceramic
components as they will break if handled incorrectly. Do not use a vacuum cleaner to clean the ceramics.
2. Radiant Box Ceramic Liners - Use only a soft brush to remove any soot deposits from the ceramic liners
during cleaning as this is the only method that can be used to remove deposits. The ceramic liners are very
delicate and should be treated accordingly.
3. Brass Trims and Frets - The brass trim and fret should be removed from the appliance for cleaning, please
ensure that the appliance has cooled thoroughly. Polished metal trims and frets are not lacquer coated and
therefore require polishing. It is recommended that a good quality metal polish is used.
FIRE FRONT SPECIFICATIONS
Fire fronts are now available in many different designs and finishes. The user can now choose their own
particular style of fire front to suit their individual fireplace setting, providing the fire front complies with the
following dimensions -
Fire Front -
(X) Max: 210mm
Min: 190mm
Ash Pan Cover -
(W) Max: 90mm
Min: 65mm
(Y) Max: 345mm
Min: 320mm
SAFETY WARNING - This appliance has a naked flame and as with all heating appliances a fireguard
should be used for the protection of children, the elderly and infirm. Fireguards should conform to
BS 6539 (1984 Fireguards for use with solid fuel appliances). This fire is not fitted with an integral
guard. In normal use consideration may be given to the use of a fireguard confirming to BS 6539,
such that the approach to the naked flame is minimised.
CLEANING AND MAINTENANCE
15
w
Y
X
Minimum area free space 15cm
2
Minimum area free space 5cm
2
Fig. 17
Stainless Steel Burner Strip
Pilot Assembly
Fig. 16
