8) Now you must SCAN in your channels. Make sure the batteries (supplied) are installed in
your REMOTE CONTROL unit. Point the remote at the digital box and press MENU.
Then use the up and down buttons on the remote to highlight
SCAN
at the bottom of the
menu, and press
OK
. You should see the following:
9) After checking that the SCAN TYPE is set on
AUTO
, and the BAND WIDTH is set to
7MHz
(leave the Channel Number field BLANK), use the down button to highlight
START
SCAN
and then press
OK
. You will see the unit picking up channels as it scans, like this:
10
