COMMISSIONING
16
Refit all the back-side liner components and slide black
top panel back into position (Fig. 37).
13. At this stage locate the burner top
grille on the tabs provided before slotting
the remaining liner blocks into position.
Note: The pilot tab should be positioned at the front
(Fig. 37a).
14. Follow ceramic layout guide (pages 26-29) fitting
rear log and bark chippings around the black grille and
not on top of the burner skin.
15. Replace the glass door and secure with two 6mm
machine screws screws.
16. Switch on the appliance and carry out smoke
testing as laid out on page 6.
Black Internal Top Panel
Fire Box
Liners
Burner
Top Grill
Liner
Blocks
Glass
Door
Fig. 37
Fig. 38
Fig. 39
Tab
Fig. 37a
