Legend 780, Руководство пользователя

Страница: 10 / 41

ATTACHING LOADER
IMPORTANT:
Never attempt loader attachment on grades which are not reasonably level.
1. Check to be sure that the surfaces of the mounts are free of
obstructions. (Fig 8
-
1)
2. Drive the tractor slowly and carefully in between the loader arms
only far enough to permit hook
-
up of the hydraulic system hoses.
(Fig. 8
-
2)
3. Once all hoses have been properly coupled drive the tractor forward
checking to insure that the bottom mount shaft on each loader upright
clears the bottom cradle on each mount tower. (Fig. 8
-
3)
4. Allow the alignment collars at the top of each upright to settle against
the top cradle of each mount tower. (Fig. 8
-
3)
5. To lock the loader onto the mount, install the two 694997
–
1 1/2”
diameter mount pins into the outside of the upright through the mount
tower, and trap the mount pin with a 683912 lockpin on the outside of
each loader upright. (Fig. 8
-
3)
6. After both uprights are secured to the mounts, raise the loader to
disengage and store the loader stands with provided mount pins. (Fig
8
-
4) & (Fig 8
-
5)
7. Prior to operation, be certain to review all safety and operation
information contained within this manual.
Page 8
Fig 8
-
1
Fig 8
-
4 Fig 8
-
5
Fig 8
-
3
Fig 8
-
2