Legend Flame EF286A, Руководство пользователя

Страница: 21 / 36

17 16
ST4*8
ST4*8
Remove 2pcs ST4*8 screws to
release the cover of the junc on
box and take it out, use a plier to
take the wire clip o and move
away the power cord
Cut the lines at the posi on
showing in picture above and
save the power cord.
Lead the wires through the hole of
the cover and connect with the
wire from the replace by cables.
Fix the cover back by 2 ST4*8
screws.
Temperature sensor arrangement
In order to improve the accuracy of the temperature sensor, you can
remove it from the appliance and x it on the wall where the hot air from
the heater has less e ect. If needed, a wall plug 4*20 could be used
when x on the wall.
18