Legend Flame EF286A-289A Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 32

background image

22

given.

The original dated sales receipt is required for all warranty claims.

This

warranty does not cover damage which has occurred during transport from the
point of purchase to the consumer’s home. This warranty does not cover glass, light
bulbs, batteries, transportation, labor, or other issues not associated with the
manufacture of the product.

This product is for

residential use only

.

Any and all commercial use of this product

voids all warranties, and frees the manufacturer from all liability.

Read  and  understand  all  assembly  and  operating  instructions,  and  all  safety
information and warnings, before use. The following will void this warranty: Damage
caused  from  tampering  with,  modifying,  or  altering  the  fireplace  insert  in  any
manner;  Damage  due  to  incorrect  assembly,  improper  care,  misuse,  or  abuse;
Damage  from  being  used  with  the  wrong  power  source;  Water  damage;  Damage
caused from this insert being used outdoors; Damage caused from this insert being
used  for  excessive  periods  of  time;  Damage  caused  by  the  insert  being  used  in  a
commercial application; Damage from use as a primary heat source; Other misuse or
abuse not specifically listed herein.

This product is not intended to be used as a primary heat source. It is for
supplemental heating purposes only.

8.

TROUBLESHOOTING GUIDE

PROBLEM

SOLUTION

There  is  no  power  to
the  fireplace,  or  it
does not turn on.

1.

Make sure the power cord is plugged into a
functioning and properly grounded 15 Amp 120V
AC electrical outlet.

2.

Make sure the ON/OFF switch on the control
panel is ON.

3.

If the unit had been working, but then turned off
by itself, the temperature limiting control may
need to be reset.

4.

Check for damage to the power cord or plug. If
damaged, DO NOT USE.

The

control

panel

functions do not work.

1.

Make sure the ON/OFF switch on the control
panel is turned on. If it is OFF, the functions will
not work.

2.

If the ON/OFF switch is ON, and the functions do
not work, please call 949-385-6588 or email
[email protected].

«
...
23
24
25
26
27
...
»

Содержание EF286A-289A

































Отзывы:

Нет отзывов

Похожие инструкции для EF286A-289A

Бренд: HAMPTON BAY Страницы: 9

Бренд: Napoleon Страницы: 2

Бренд: Cannon Страницы: 38

Бренд: Dimplex Страницы: 16

Бренд: stellar labs Страницы: 50

Бренд: Twin-Star International Страницы: 19

Бренд: Majestic Страницы: 14

Бренд: Valcourt Страницы: 70

83035033 WW11994

Бренд: UBERHAUS DESIGN Страницы: 11

Бренд: JAYLINE Страницы: 10

Бренд: Majestic fireplaces Страницы: 24

Бренд: HASE Страницы: 48

Бренд: Mosaic Страницы: 17

Бренд: Heat & Glo Страницы: 71

Бренд: True North Страницы: 28

Бренд: GlammFire Страницы: 12

Бренд: IHP Страницы: 2

Бренд: FocalPoint Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды