3
CTCSS Tone Select............……………………………………………………………………….
17
DCS Tone Select............………………………………………………………………………….
17
Invert DCS Tone Select............………………………………………………………………….
18
Tx Output Power High/Low Setting............………………………………………………….. 18
Normal Scan List On/Off Setting............……………………………………………………… 19
Priority Scan List On/Off Setting............………………………………………………………
19
Two–Tone Option Setting............……………………………………………………………… 20
System Option Setting............…………………………………………………………………..
21
Beep Tone on/Off Setting............……………………………………………………………….
22
VOX Option On/Off Setting............……………………………………………………………
22
VOX Sensitivity Setting............………………………………………………………………….
23
Time-Out-Timer
Setting............…………………………………………………………………
23
TOT Penalty Setting............……………………………………………………………………. 24
Busy Channel Lock Out On/Off Setting............…………………………………………… 25
Marked Idle On/Off Setting............…………………………………………………………..
26
SCAN Setting ............…………………………………………………………………………….
27
Scan Mode Setting............……………………………………………………………………….
28
Scan Speed Time Setting............……………………………………………………………….
29
Scan Delay Time Setting............……………………………………………………………….
29
Look Back Time Setting............………………………………………………………………… 30
Priority Scan Setting............……………………………………………………………………..
31
Tx Delay On/Off Setting............………………………………………………………………..
31
Power Save Setting............………………………………………………………………………. 31
Power Save On Time Setting............…………………………………………………………..
32
Power Save Off Time Setting............…………………………………………………………..
32
Power Save Delay Time Setting............……………………………………………………….
32
Clear to Talk On/Off Setting............……………………………………………………………
33
Roger Beep On/Off Setting............……………………………………………………………..
33
Display Option Setting............…………………………………………………………………..
34
Channel Display Format Setting............………………………………………………………. 34
Display Slide On/Off Setting............………………………………………………………….. 35
X. Licensing, Safety and Service Information..……………………………………………………….
36
FCC
Licensing
......................................…………………………………………………………. 36
Safety
Information
.................................………………………………………………………… 36
Service
...............................................…………………………………………………………. 36
XI. Maintenance..........................................…………………………………………………………. 36
XII. Software
Copyrights................................…………………………………………………………
37
XIII.
Topaz3 / Legacy Product Warranty.........…………………………………………………………. 37
I. FCC RF Exposure Compliance Requirements for Occupational Use Only
The Federal Communications Commission (FCC), with its action in General Docket 93-62,
November 7, 1997, has adopted a safety standard for human exposure to Radio Frequency (RF)
electromagnetic energy emitted by FCC regulated equipment. Topaz3 / Legacy subscribes to
the same safety standard for the use of its products. Proper operation of this radio will
result in user exposure far below the Occupational Safety and Health Act (OSHA) and
Federal Communications Commission limits.
CAUTION -
DO NOT transmit for more than 50% of total radio use time (50% duty cycle). Transmitting
more than 50% of the time can cause FCC RF exposure compliance requirements to be exceeded.
•
This radio is NOT approved for use by the general population in an uncontrolled environment.
This radio is restricted to occupational
use, work related operations only where radio operator must have the knowledge to control the
user’s exposure conditions for satisfying the higher exposure limit allowed for occupational
use.
