www.legacyclassic.com
ASSEMBLY INSTRUCTIONS
LEGACY CLASSIC
FURNITURE
9740-521 ROUND TO OVAL PEDESTAL TABLE
C
E
D
E
D
F
A
A
A
A
B
5
Step 5
Step 6
Assembly Procedures:
Step 1: Lay out all parts and hardware. Make sure the quantity of each is correct and the feet are free of stain,
staples, screws and nails.
Step 2: Remove the connecting plate (F) and the leaf (B) from the table top (A) using wrench (5) as shown.
Fully close the table top with the table leaf removed and lock the table top together. Keep the
bolts for step 5.
Step 3: Assemble the leg (D & E) to the mounting plate (C) using hardware (1,3,4,6) as shown.
Step 4: Turn the base upright. Assemble the connecting plate (F) to the leg (D&E) using hardware (2,3,4,6) as
shown.
Step 5: Place the entire base on the table top (A) and assemble using hardware from step 2 as shown.
Step 6: Turn the table top its upright position. Unlock the lock mechanism under the table top before pulling
it apart and then carefully insert the table leaf(B) as shown.
Use the adjustable leveler necessary. Assemble is complete.
NOTE: If handled improperly, the act of installing and removing table leaf may damage the table. Please use
Caution and delicate handling when installing and removing table leaf to prevent damaging the table
Top surface and edges. It is best two persons are involved when installing or removing table leaf.
