LEGA
srl
Costruzioni Apistiche – via Maestri del Lavoro 23 – 48018 Faenza
www.legaitaly.com - Tel 054626834 – Fax 054628279 – P.iva 00043230390
4 / 6
1
Combs or wax to melt
2
Lid
3
Tank
4
Water level and inlet pipe
5
Melted wax outlet pipe
6
Melted wax collector sump
7
Electric resistor
8
Melted wax internal collector tray
9
Comb holder basket
TECHNICAL DATA
Overall dimensions
915 x 850 x 625
mm
Weight
40
kg
SAFETY DIRECTIONS
For safety purposes, this machine should only be used by adult personnel who must be aware of the instructions contained in
this handbook.
CAUTION!
Water will reach boiling point (100°C) in the tank. Keep the wax melter out of the reach of children or unauthorised
personnel.
A
LWAYS USE PROTECTIVE GLOVES DURING WORK OR OTHER PROTECTIVE CLOTHING SUITABLE FOR PREVENTING BURNS IN CASE OF UNWANTED
CONTACT WITH THE DEVICE
.
DESCRIPTION
The wax melter “ELEKTRA 30” can contain up to 30 D.B. frames or an equivalent number of supers or cappings.
It enables to recover the wax without having to cut away the comb from the frame. The frame wire will remain intact allowing to re-use
still good frames. It consists of:
- a stainless steel rectangular tank used as a container for the water to bring to the boiling point (3);
- a wax collector tray (8) with outlet to the outside;
- a comb holder basket in stainless steel perforated plate (9);
