3
Steps 1-2
Installation Procedure
Lefroy Brooks always recommends that plumbing products be installed by a licensed professional.
Shut off main water supply before installation.
Please note:
When there is a difference in water pressure between hot and cold supplies to the mixing valve, the pressures
should by equalized by a plumber in accordance with best practice and legislation.
This product requires the installation of certified atmospheric vacuum breaker (AVB) installed in-between the
shut off valve and hose inlet. The AVB should be installed so its vent ports are not pointing in an upward
direction. Should you be unfamiliar with an AVB, we recommended consulting a plumbing professional.
valve
AVB
HOSE
1
2
Make sure that main water supply is shut off
before further installation. Take off rubber
protective cap and plug from valves, as well
as the underneath protective bubble bags.
Install escutcheon and hand shower.
1
2
2
1
3
Ø1 1/4"
(Ø32mm)
Ø2 3/8"
(Ø60mm)
1/2-14NPSM-2A
3/16"
(5mm)
8 13/16"
(224mm)
1 O-ring
(004640N)
2 Escutcheon
(071390)
3 Handshower
(S2111104)
