5
Steps 3-4
Installation Procedure
Lefroy Brooks always recommends that plumbing products be installed by a licensed professional.
Shut off main water supply before installation.
4
Place spout over spout hub and insert pin
into the small hole on the deck. Finish
installation by inserting set screw into
access hole in back of spout and screw
tightly.
4
3
Important:
It is recommended that to prevent the
spout from accidentally rotating after
installation, where possible, the small brass
pin should be screwed into the spout
base.Drill a 1/4" (5.5mm) diameter hole
into the deck to a depth of about 7/16" -
9/16" (11-15mm), following the position
indicated in the figure above.
3
1-3/16"(30mm)
