Lefroy Brooks K1-4201, Инструкции по установке, эксплуатации и обслуживанию

Страница: 4 / 10

1
2
3
4
80mm~105mm
Wall surface
Hot supply
Outlet
Cold supply
96mm
140mm
99mm
Ø50mm
4-R15mm
58mm
4
Steps 1-4
Installation Procedure
Lefroy Brooks always recommends that plumbing products be installed by a licensed professional.
Shut off main water supply before installation.
1
Before installing the valve into the wall, please note that a distance between 80mm~105mm
from the wall surface to the rear of the valve should be left so that the trim can be fitted
correctly.
2
Install valve assembly into the wall.
3
Cut a hole on the wall surface for fitting the trim kit. The hole dimension is as shown in figure 3.
4
Throw away the protective caps only when building construction is completed and you are ready
to fit the trim kit in.