![Lefroy Brooks K1-4200 Скачать руководство пользователя страница 4](http://html1.mh-extra.com/html/lefroy-brooks/k1-4200/k1-4200_installation-operating-and-maintenance-instructions_1868329004.webp)
wall surface
80~105mm
Hot supply
Outlet
Cold supply
140~150mm
100~110mm
1
2
3
4
4
Steps 1-4
Installation Procedure
Lefroy Brooks always recommends that plumbing products be installed by a licensed professional.
Shut off main water supply before installation.
1
Before installing the valve into the wall, please note that a distance between 80mm~105mm
from the wall surface to the rear of the valve should be left so that can fit the trim kit further
2
Install vale assembly into the wall.
3
Cut a hole on the wall surface for fitting the trim kit. The hole dimension is as the figure
instructed.
4
Throw away the protective caps just while the building construction is completed and you are
ready to fit the trim kit in.