________________________________________________________________________________________________
_______________________________________________________________________________________________
Operation Manual
Page 3 of 10
Section 1: Operation Safety
The portable Pipe Cutting and Beveling machine –Lite4 /
Lite6 are designed to handle carry easily for field use.
Please use it properly based upon the procedure in this
manual. Using it for purpose other than those described
in this manual may cause injury to the user or to others.
It may also cause damage to the machine or other
equipment.
Therefore:
x
Always ensure the machine is in good working
condition and comply with these notes on safety
x
Keep complete documents nearby the machine
x
General valid regulations for the prevention of
accidents must be observed.
x
Only use the machine for cutting and beveling of
pipes
x
Damage caused by not following the manual is
user’s responsibility
x
Only use the dimensions and material specified
in these instructions. Consult LEFON for cutting
material that is not covered in the manual.
x
Inspect the machine daily of visible sign of wear
or damage.
x
Repair any damage or defect immediately
x
Only qualified electrician can work on the
electrical equipment
x
Only operate the machine if the Electrical
Restart Inhibitor is working properly
x
Unplug the power input before carrying out any
maintenance or repair work on the machine.
Keep Safety in Mind
x
Report any unusual response from the machine
to the person in charge of this machine
x
Keep Safety in mind all the time
x
Wear protective goggles, safety gloves and ear
protection when working with the machine
x
Keep hands off the machine during processing
x
Pay attention to the surroundings. Don’t use any
electric tools in humid area. Make sure to have
excellent lighting. Do not working near
combustible liquids or gases.
