To enter programming mode, press the “SETUP” button and enter the password “1379” followed by
“ENTER”. If the password is accepted, the display will show “use * to scroll to menu options”.
(Use the “
∗
/ Menu”
key to scroll through the different menu options or press “CANCEL” to exit the
system programming menu.)
1) Set the Current Time
z
At the “Set Current Time” menu, set the hour then press “ENTER”
key.
z
Set the minutes and press “ENTER” key.
z
Use the “# /Select” key to select AM or PM.
z
After the correct time is set, press the “ENTER” or “
∗
/ Menu
”
key to return to the main menu or
press the “CANCEL” key 2 times to exit the system programming menu.
.
2) Set the Sleep Shutdown Time (
Factory Default: ON – 1 AM)
This system has an “ALL SLEEP” function that turns off all battery pagers at once automatically.
To turn this feature off
•
Press “#/Select” key to turn the sleep shutdown “OFF”
•
Press “ENTER” to go back to the main menu.
To change the shutdown time
•
Press “#/Select” key to turn the sleep shutdown “OFF”
•
Set the hour then press “ENTER”
key.
•
Set the minutes and press “ENTER” key.
•
Use the “# /Select” key to select AM or PM.
•
After the correct time is set, press the “ENTER” or “
∗
/ Menu
”
key to return to the main
menu or press the “CANCEL” key 2 times to exit the system programming menu.
3) Range Test (
Factory Default: OFF)
With this feature you can determine what distance your transmitter will cover.
z
Remove a couple of coasters from the charger base.
z
At the range test menu, press “#/Select” key to turn range test “ON”
z
Press “ENTER” to start the range test. As soon as range test is activated you’ll notice the
coasters flash once every 10 seconds (if you use pagers they will vibrate). Walk around your
property. When you reach the point where the coasters do not flash consistently, this is your
maximum range. We can walk you through changing the power level of your transmitter.
z
Press the “CANCEL” key to stop the range test. Press the “CANCEL” key again to exit the
system programming menu.
NOTE: The transmitter has an auto shut off feature that will stop the range test after 15 minutes
.
4) Set Pager Alert (
Factory Default: Flash & Vibe)
With this feature you have the option of changing the way your coasters alert the guest.
Be sure that all coasters are returned before performing this procedure.
To change the alert mode of your coasters follow these instructions
z
Remove all the coasters from the charger base or unplug the power supply that is connected to
