Lees 200W BEAM LIGHT 7R, Руководство пользователя

Страница: 6 / 15

6
Make sure that the available voltage is not higher than stated at the end of this
manual.
Make sure the power cord is never crimped or damaged by sharp edges. If this would
be the case, replacement of the cable must be done by an authorized dealer.
Always disconnect from the mains, when the device is not in use or before cleaning it.
Only handle the power cord by the plug. Never pull out the plug by tugging the power
cord.
During initial start-up some smoke or smell may arise. This is a normal process and
does not necessarily mean that the device is defective, it should decrease gradually.
Please don’t project the beam onto combustible substances.
If the external flexible cable or cord of this luminaire is damaged, it shall be
exclusively replaced by the manufacturer or his service agent or a similar qualified
person in order to avoid a hazard.
CAUTION!
Never touch the device during operation!
The housing may heat up!
C CAUTION!
N Never look directly into the light source,
A As sensitive persons may suffer an epileptic shock.
Please be aware that damages caused by manual modifications to be the device are not
subject to warranty. Keep away from children and non-professionals.
INSTALLATION INSTRUCTIONS
CAUTION!
Only install the lamp with the device unplugged from the mains.
CAUTION!
The lamp has to be replaced when it is damaged or deformed.
Before replacing the lamp let the lamp cool down, because during operation, the lamp
can reach very high temperature.
During the installation of halogen lamps do not touch the glass bulbs bare handed.
Always use a cloth to handle the lamps during insertion and removal.
Do not install lamps with a higher wattage. They generate higher temperatures than
which the device was designed for.