Leedarson Lighting
mode.
2.2.3 LED Indicator
LED indicator embedded in internal PCBA and support red/yellow colors to display different status
of devices.
Connecting
Red indicator quickly flash for 3 times, if successfully connected, red
indicator hold on for 3 seconds.
Connected
Red indicator keep on for 3s.
Resetting
Red indicator slowly flash for 2 times.
Charging
Blue indicator quickly flash until full charged.
Low Power
Blue indicator slowly flash, about 2 minutes once
2.3 Product Operation
2.3.1 Product Charging
Open the soft cover inside product and plug in Micro USB interface and connect to power supply. If
blue indicator quickly flash, the product turned into charging mode.
2.3.2 Connecting
Use APP or special button in gateway to turn on searching function. While gateway waiting for
connection, short press Reset button to connect. Check the status of LED indicator as the sheet
above.
2.3.3 Reset
Hold on pressing Reset button for 5 seconds and check the status of LED indicator as the sheet above.
2.3.4 Working Mechanism
1. Sleeping and awaking of arrival sensor is based on integrated acceleration detector. If acceleration
detector had not triggered for 2.5 minutes, arrival sensor send out a package to gateway and go to
sleep mode. While acceleration sensor triggered, arrival sensor wake up and communication with
gateway immediately.
2. If arrival sensor send out a Heartbeat package and not get reply from gateway, system judge arrival
sensor as user left to trigger relative scenarios and send out message.
3. If arrival sensor send out a Heartbeat package and get reply at once from gateway, system judge
arrival sensor as user back to trigger relative scenarios and send out message.
