Be sure that all pagers are returned before performing this procedure.
Remove all the pagers from the charger.
At the “Set Pager Alert” menu, press “#/Select” key to scroll through the different alert options.
After making a selection, press “ENTER” key 2 times. After sending the message, the pagers
will now respond with your new selected alert mode.
6)
Duty Alert
With this feature, you can page a certain pager to remind them at every specified time
(1 to 240 minutes). This function is available up to 3pcs pager.
At the “Duty Alert” menu, press “#/Select” key to turn the duty cycle “ON” and press the
“ENTER” key
Enter the pager number and press “ENTER” key.
Enter the cycle time (in minutes) and press the “ENTER” key.
Press just “ENTER” key on the display of “Enter the numeric message”.
You will see display word of “Duty __ saved”
* For example, if you input “1” in pager number and “10” in cycle time,
the pager #1 will be paged at every 10 minutes.
7)
Out of Range
With this feature, the pagers will play a melody when taken out of range from the transmitter to
inform the guest that they are located “Out of Range” and will miss their page. The melody will only
stop, when they return back within range.
Turning the function of Out of Range “ON”
Insert all the pagers into the charger.
At the “Out of Range” menu, press “#/Select” key to turn the Out of Range “ON”
Press “ENTER” key 2 times until all procedure is completed.
After sending the signal, all the pagers will light up once to tell you that they received the
new message.
Turning the function of Out of Range “OFF”
Insert all the pagers into the charger.
At the “Out of Range” menu, press “#/Select” key to turn the Out of Range “OFF”
Press “ENTER” key 2 times until all procedure is completed.
After sending the signal, all the pagers will light up once to tell you that they received the
new message.
8)
Set Default MSG
