![Lee Stafford Coco Loco LSHD24 Скачать руководство пользователя страница 3](http://html1.mh-extra.com/html/lee-stafford/coco-loco-lshd24/coco-loco-lshd24_instruction-manual_1867889003.webp)
2
ALWAYS
3
ALWAYS use the unit only for its intended use as
described in this manual. Only use attachments
recommended in this pack.
3
ALWAYS take care to avoid contact between hot
surfaces and bare skin, particularly at the face
and neck.
3
ALWAYS ensure the appliance is switched off,
unplugged from the mains and it has cooled
down before storing.
3
ALWAYS regularly check the mains cord for damage.
If damaged, discontinue use immediately and do
not use until the appliance has been inspected
and approved by a qualified electrician for
repair to avoid a hazard.
3
ALWAYS clean before storing away.
3
ALWAYS keep mains cord away from hot or
heated surfaces.
3
ALWAYS store in the original box in a cool, dry place.
NEVER
7
NEVER use this product if it is not working
correctly, if it has been dropped or damaged or
dropped into water or any other liquid or if it
has a damaged plug or mains cord. If it has the
unit must not be used.
7
NEVER wind the mains cord around the handle when
hot or while storing as this will damage the cord.
7
NEVER store while still connected to the mains.
CoCo LoCo BLow & gO nuTs DRyer
3
7
NEVER use with wet hands.
7
NEVER use this product near bathrooms,
showers, basins or other vessels
containing water and do not immerse in
water or any other liquids.
7
NEVER place the unit near heat sensitive materials.
7
NEVER leave unattended when plugged in and
operating.
7
NEVER attempt repairs yourself. Repairs to
electrical appliances should only be performed
by a qualified electrician. Improper repairs may
place the user at serious risk and will invalidate
the guarantee.
7
NEVER carry or suspend the appliance by the
power cord.
IMPORTANT SAFETY POINTS
Read these instructions thoroughly before using this appliance or connecting to
the mains supply.
A 13 amp BS1362 ASTA approved fuse must be fitted.
Before switching on, make sure that the voltage of your electricity supply is the
same as that indicated on the rating plate. Connecting it to any other power
source may cause damage.
This product may be fitted with a non-rewirable plug. If it is necessary to change
the fuse in the plug, the fuse cover must be refitted. If the fuse cover becomes lost
or damaged, the plug must not be used until a suitable replacement is obtained.
If the plug has to be changed because it is not suitable for your socket, or due
to damage, it should be cut off and a replacement fitted, following the wiring
instructions shown. The old plug must be disposed of safely because inserting it
into a socket could cause an electrical hazard.