5
A/1878 Revision A 29/01/2018
ASSEMBLY INSTRUCTIONS
STEP 8
STEP 9
STEP 10
CARE AND MAINTENANCE
Screw holes located at
the front of the cabinet.
With the Door fully engaged in the
top and bottom Tracks, turn it to
be vertical. Slide the Door to the
left into the cabinet and ensure it
runs smoothly.
With the left Door pushed back,
repeat the installation of the right
hand Door.
Slide the Doors open. In the
middle of the Top slightly pull
down the ends of the front Tracks
sufficient to slide the Centre Stop
into place. Ensure that the ends
of the Tracks near the Doors stay
attached to the Track Curves.
Push the Front Tracks back into
place.
The cabinet can be levelled by
adjusting the screws in the two
holes at the front of the cabinet.
There may be a Cover Cap which
will need to be removed to access
the screw head.
Cover the Cams with Cover Caps
(19)
.
Clean using a damp cloth and mild detergent – do not use abrasive cleaners or bleach.
