No. 113
A/1882 Revision A 10/10/2018
3
ASSEMBLY INSTRUCTIONS
STEP 4
STEP 5
Slide the brackets on the Legs
into the open notched ends of the
Rails screwed to the Top.
If a Modesty Panel is attached,
ensure that the Bolts in the Leg
are aligned with the appropriate
holes in the Modesty Panel.
Lock the Cams with just over half
a turn.
Screw the Grub Screws
(18)
into
the Expander Plate through the
hole in the Rail. Do Not tighten the
Grub Screws yet.
Place the Spacer
(11)
between
the Top and the longest Leg and
align it with the hole near the front
upright.
Screw Socket Head Bolt
(16)
through the Leg and Spacer into
the Top.
Tighten the Grub Screws until the
Expander Plate is pushed tight to
the inside of the Rail. Tighten the
Socket Head Bolt.
Fit the Cam Cover Caps
(15)
.
3
4
16
18
11
15
18
