LEDX Mamba 4 000 X-pand, Руководство пользователя

Страница: 2 / 8

Congratulations on your choice of LEDX headlamp
!
The lamp has been developed with a focus on bright light, low weight and several
different fields of use.
Be careful; the light is very powerful, do not look straight into the lamp when tur-
ning on the light. Due to the high power it also emanates much warmth. Please
make sure that air can circulate freely around the lamp, this is extra important
when used at the highest seCng.
The lamp provides a broad light close to the body and a very long distance li ght. It
can be controlled in three power levels which give around 10%, 40% and 100%.
The lamp is fi>ed with heat sinks that keep the temperature low inside the lamp case.
This contributes to a stronger light since the light output diminishes with a rise in
temperature.
The head light can be complemented with a small backup ba>ery that a>aches to the
back of the headgear. It provides light for about 80 minutes on the lowest effect.
The headgear has a dual headband and two elasDcs in the neck. The bo>om is placed
extra low so the main scaffold should sit comfortably on the head, even with a cap. All
bands are regulated with Velcro, making it easier to balance the right fit.
The ba>eries are Li-Ion or Li-pole, have no memory and must not be discharged befo-
re charging. At delivery, the ba>eries are only partly charged, charge therefore the
ba>eries before using the lamp for the first Dme. Be sure to use the correct charger
for each ba>ery.
Disconnect the ba>ery connector when not in use.
!