LEDS C4 S.A. - Afores s/n 25750 Torà. Lleida (Spain). +34 973 468 100
leds-c4.com
Master and Slave Setting:
1: The receiver has both master and slave functions which can be set with a jumper. Short circuit of the jumper
means master function, and open circuit means slave function. Once short circuit the jumper on a receiver, please
power off and power on the receiver to enable master function. Setting master and slave enables perfect
synchronization of color changing effects.
2: Set one receiver as master and pair it to any zone of a remote, and this zone shall only have one receiver which
works as master. Set all other receivers as slave and pair them to other zones of the remote, and multiple receivers
can be paired to each zone. Then choose all zones on the remote and play the color changing effects, the master
will send sync signal to the slaves to achieve perfect synchronization. The max. sync distance between the master
and any slave is within 30m.
Buit-in 10 color changing modes are as follows:
Mode 1: Any two colors of RGB mix fade-in & fade-out.
Mode 2: RGB three colors mix fade-in & fade-out.
Mode 3: RGB three colors mix fade-out & fade-in.
Mode 4: RGB flash.
Mode 5: RGB three colors fade-in & fade-out successively.
Mode 6: RGB three colors fade-in successively.
Mode 7: RGB three colors fade-out successively.
Mode 8: RGB three colors jump changing successively.
Mode 9: R&B two colors mix fade (R in B out), then G fade-in, then R&B mix fade (R out B in), then G fade-out.
Mode 10: B fade-out, then G&B mix fade (G out B in), the R&G mix fade (R out G in), then R fade-in.
—Product Dimension