Phone:
(844) LEDONE6 |
Fax:
1-510-217-9461 |
Web:
www.ledonecorp.com
`
GROUND MOUNTING:
Mount to a pole as shown in Fig. 3.
1.
Thread fixture into pole cap.
2.
Connect wires correctly.
3.
Place post cap on the pole.
4.
Aim floodlight in the direction desired and tighten locknut and
arm screw.
TRUNNION MOUNTING:
CAUTION: UL and C UL listed or CSA certified liquid tight cord grip
suitable for use with three conductor type STW flexible cord shall be used
for connection to a wet location outlet box provided by others.
To adjust the angle of the fixture using the trunnion shown in Fig. 4:
1.
Loosen the pivot bolts and angle locking screw.
2.
Adjust the fixture to the desired angle.
3.
Tighten pivot bolts and angle locking screw.
WIRING:
Universal voltage driver permits operation at 120V through 277V, 50/60Hz
except fixtures factory ordered with a (PC).
1.
Connect the BLACK fixture lead to the (+) LINE supply lead.
2.
Connect the WHITE fixture lead to the (-) COMMON supply lead
3.
Connect the GROUND wire from fixture to the supply ground.
Without photocell
LOD-KFL Series Installation Guide
With photocell
Fig. 2
Fig. 4
