• The LED head torch is switched on/off using the power on/off switch.
• Press the power on/off switch to change the modes of the COB LED lighting and
spot lighting.
• With the power on, press the sensor switch to change the mode (wave induction
type, wave your hand in front of the sensor).
• Long press the on/off switch at any mode to change the strobe mode.
Follow the steps below when charging the LED head torch:
1. Ensure the head torch is off when charging.
2. Connect the charging lead to a 5V 1A supply & the port on the torch.
3. Charging to full may take up to 2.5 hours. Once fully charged disconnect from
the power supply..
• The LED lights are very bright and can cause serious injury to the eyes.
• Do not stare directly into the LED beam.
• Do not shine the light directly into someone’s eyes.
• Do not allow children to play with this product.
• Use only the input voltage specified.
• Do not leave on a flammable surface when charging.
• This head torch is rated at IP44 (splashproof), do not immerse in water.
• Do not expose the battery to flames or excessive heat.
Do not use any cleaning chemicals, wipe with a soft damp cloth when necessary.
This product should be disposed of in accordance with local regulations.
For further information visit www.tlc-direct.co.uk
Operation:
Charging:
Safety:
Cleaning and Disposal:
